Introduction
Mini_QL2006 programmer is the
high-speed programmer designed specially for
development and production programming of PIC single
chip microcomputer by QLS Electronic Technology Co.,
Ltd. The product is featured with small volume, low
power consumption, high reliability as well as easy
and convenient operation.
Mini_QL2006 is applicable for almost all
PIC10/12/16/18 series Microcontroller's except
16C5X. It also supports memories in 24XX series and
93XX series.
Features
Features of Mini_QL2006 Programmer:
1.High performance-price ratio, designed with
the updated PIC programming algorithm, higher speed
than other similar products, stable performance,
support more devices. Support online upgrade of
programmer hardware, easy and convenient upgrade.
communication modes of USB port, convenient for
application on lap-top computer which doesn’t have
serial port (convenient connection of one USB cable
with computer). Automatic programming function and
automatic programming process enable mass production
for customer’s great convenience (programming
available on chip installation without pressing any
other key).
2.Overall message indication, audio plus word
will enable customer well informed about operating
status.
3.Through
built-in ICSP interface, support ICSP (in-circuit
serial programming) directly without any additional
device. User may program after circuit board is
welded. For FLASH Microcontroller, online upgrade is
available.
4.Equipped with 40pin DIP
socket, available for direct programming of
8pin-40pin DIP chip. Programming of other surface
mount device (SMD) is available based on universal
adaptor.
5.Compatible with operating systems (OS)
including Windows98, Windows2000/NT and Windows XP,
Windows 2003, Windows Vista.
6. Function of programming counting, can
preset and count the programming number.
7.Function of
serial number auto-increment, available to set
auto-increment area as program area or EEPROM data
area, set auto-increment system, set auto-increment
start address/end address and auto-increment step,
set to ignore high byte in auto-increment to avoid
effect to RETLW instruction in auto-increment part
of program
8.Program
supports load of *.HEX or *.BIN files, available to
converse *.BIN files to *.HEX format.
9.With programming data
monitoring. Through check summing, available to find
immediately if programming data is changed or not.
Verification and formula are subject to definition
of Microchip.
10.Programmer hardware auto-search when start
of software, no need for software setup before use,
easier and more convenient operation.
11.High
programming success rate, enough programming depth.
Programmable voltage, electrical parameter of
programming and programming algorithm satisfy the
technical specifications of manufacturers.
Hardware
There
is no special requirement for installation of this
programmer.
Connect programmer to PC through USB cable, then the
programmer works. (This programmer supports direct
USB power supply, you may not connect external
power. However, if current through USB interface is
very low – less than 200MA and insufficient to drive
programmer, connection to external power is required
to enable the programmer to work regularly.)
Software
Find
file QL-PROGvXXen.EXE under root directory of CD,
double click this file to access installation
interface of application software, and operate
according to prompts to finish the installation.Its
shortcut will appear on desktop automatically after
installation.
After
proper installation, shortcut of this software will
appear on desktop. We can double click it to run the
software. (Note: Run the software after proper
connection of hardware so as to identify the
hardware easily.)
Interface after start of software is shown below:
