Introduction
QL-2006 programmer is the
high-speed programmer designed specially for
development and production programming of PIC single
chip microcomputer (SCM) by QLS Electronic
Technology Co., Ltd. The product is featured with
small volume, low power consumption, high
reliability as well as easy and convenient
operation.
QL-2006 is applicable for almost all
PIC10/12/16/18 series SCMs except 16C5X. It also
supports memories in 24XX series and 93XX series.
Features
Features of QL-2006 Programmer:
1.High performance-price ratio, designed with
the updated PIC programming algorithm, higher speed
than other similar products, stable performance,
support more devices. Support online upgrade of
programmer hardware, easy and convenient upgrade.
Two communication modes of USB and serial port,
convenient for application on lap-top computer which
doesn’t have serial port (convenient connection of
one USB cable with computer). Automatic programming
function and automatic programming process enable
mass production for customer’s great convenience
(programming available on chip installation without
pressing any other key).
2.Overall message indication, audio plus word
will enable customer well informed about operating
status.
3.Through
built-in ICSP interface (completely compatible with
ICD interface of MICROCHIP), support ICSP
(in-circuit serial programming) directly without any
additional device. User may program after circuit
board is welded. For FLASH SCM, online upgrade is
available.
4.Equipped with 40pin DIP
socket, available for direct programming of
8pin-40pin DIP chip. Programming of other surface
mount device (SMD) is available based on universal
adaptor.
5.Compatible with operating systems (OS)
including Windows98, Windows2000/NT and Windows XP.
6. Function of programming counting, can
preset and count the programming number.
7.Function of
serial number auto-increment, available to set
auto-increment area as program area or EEPROM data
area, set auto-increment system, set auto-increment
start address/end address and auto-increment step,
set to ignore high byte in auto-increment to avoid
effect to RETLW instruction in auto-increment part
of program
8.Program
supports load of *.HEX or *.BIN files, available to
converse *.BIN files to *.HEX format.
9.With programming data
monitoring. Through check summing, available to find
immediately if programming data is changed or not.
Verification and formula are subject to definition
of Microchip.
10.Programmer hardware auto-search when start
of software, no need for software setup before use,
easier and more convenient operation.
11.High
programming success rate, enough programming depth.
Programmable voltage, electrical parameter of
programming and programming algorithm satisfy the
technical specifications of manufacturers.
Hardware
There
is no special requirement for installation of this
programmer.
Connect programmer to PC through serial port cable
or USB cable and power up, then the programmer
works. (This programmer supports direct USB power
supply. If USB cable is connected, you may not
connect external power. However, if current through
USB interface is very low – less than 200MA and
insufficient to drive programmer, connection to
external power is required to enable the programmer
to work regularly.)
Software
Find
file QL-PROGvXXen.EXE under root directory of CD,
double click this file to access installation
interface of application software, and operate
according to prompts to finish the installation.Its
shortcut will appear on desktop automatically after
installation.
After
proper installation, shortcut of this software will
appear on desktop. We can double click it to run the
software. (Note: Run the software after proper
connection of hardware so as to identify the
hardware easily.)
Interface after start of software is shown below:
